Multitask X1

The X1 is a unique solution designed to encapsulate the data, power & sprinkler systems removing the need for cable trays and suspended ceilings. 

How it works? Well, the main body is installed below the sprinkler configuration using the seismic saddle brackets to mount and adjust the lower (Main) body. There is a sprinkler system module which is ready to install at each sprinkler head measuring 300mm in length, this is installed first, then the remaining body is fitted either side of the module utilising the fixing brackets.

Once the main body has been installed, the data and power is separated using panels mounted in the upper body in individual areas that can be added or maintained separately. The LED light source is in a separate cavity in the main body. this is installed by using a gear tray that mounts within the frame (vertically) and is pre wired with plug and play joiners making installation simple.

The upper body which houses the data, power and water is covered by wings that are clipped into place without tools, enabling easy access for additions and maintenance etc.

The X1 is an all in one service fixture – reticulating the primary lighting, sprinkler and electrical systems and can be modified to suit a variety of applications.

 

Model Multitask X1
LED Power 26.4W/m - 52.8W/m
LED Current 325mA
L & B L80 B10 @ 60,000hrs
CRI 94
CCT 2700 / 3000/ 4000K
Beam Angle (Degrees) 120
System Output 4254lm/m - 8914lm/m
Dimensions 300mm x 120mm
Controls Electronic / 0 -10V / Dali
Options 90 degree Corners, Custom angles
are avilable / Direct & Indirect /
Custom Colours & Lengths Available

Product Data